• Products
  • Support
  • Technical information
  • Download
  • Corporate information

Home > Products > Automotive Test Equipment > Crash Test > LSM-E-15KNS1

LSM-E-15KNS1

Neck 6-Component Force Transducer
LSM-E-15KNS1

Neck 6-Component Force Transducer
for Dummy Neck Upper Parts
Mounted to the neck of a crash dummy such as
Hybrid III, the LSM-E-5KNS1 simultaneously detects
6 force components acting to the neck by impactinitiated
inertia force generating in the head. 

Features

  • Conforms to Federal Motor Vehicle Safety Standard 208
    as a sensor to acquire data of injury criterion.

PDF download

Specifications

Performance

Rated Capacity Fx: ±10 kN, shearing force in front-rear direction
Fy: ±10 kN, shearing force in left-right direction
Fz: ±15 kN, axial force in up-down direction
Mx: ±300 N.m, moment in left-right direction
My: ±300 N.m, moment in front-rear direction
Mz: ±300 N.m, angular moment
Nonlinearity Within ±1%RO
Hysteresis Within ±1%RO
Rated Output Approx. 1.7mV/V (3400μm/m) for Fx, Fy, Mx, My
Approx. 0.6 mV/V (1200μm/m) for Fz
Approx. 0.6 mV/V (1200μm/m) for Fz

Environmental Characteristics

Safe Temperature Range -20 to 70℃
Compensated Temperature Range 0 to 40℃
Temperature Effect on Zero Within ±0.05%RO/℃
Temperature Effect on Output Within ±0.05%/℃

Electrical Characteristics

Safe Excitation Voltage 6V AC or DC
Recommended Excitation Voltage 1 to 4V AC or DC
Input Resistance 120Ω±5%
Output Resistance 120Ω±5%

Cable

 

 

 4-conductor (0.05 mm 2 ) vinyl shielded cable, 2.5 mm diameter by
7 m long, terminated with connector plug at both ends (R05-PB5M
to amplifier side) (Shield wire is not connected to the body.)

Mechanical Properties

Safe Overload Rating 120%
Interference ±5%RO

Back to Top

Registration

Please register for our website support when downloading files or documents.

New registration

Inquiries from the Web