DIS-3200 Series
Off-Vehicle Data Acquisition System For Automobile Safety Test
DIS-3200 Series
Compact Data Acquisition System
and Measurement by Strain and
Voltage Signals up to 8 Channels
DIS-3200 series are suitable to barrier load cell,
pedestrian impact test, and dummy calibration system
which do not require shock resistance. Also, DIS-3200
series are applicable to various sensors: strain gages,
strain gage type transducers, piezoresistive transducers,
potentiometer type transducers, voltage-output sensors.
Features
-
8ch/unit and expandable channels up to 128 by
connecting 16 units - AC power supply and built-in battery
- Large capacity memory
- Ethernet (10BASE-T) and GP-IB Interface
PDF download
- DIS-3200 (270.46 kB)
OVERALL SPECIFICATIONS
| External Dimensions | 327(W) × 44(H) × 180(D) mm(excluding protrusions) |
| Power Source | 100 VAC or built-in battery |
| Operation environment specifications | |
| Operationg temperature range | Within 10 to 80℃RH (Noncondensing)esistance |
| Operationg humidity range | Within 10 to 80℃RH (Noncondensing)esistance |
| Impact resistance | 49m/s2 (5G) |
| Others | Should have no dust or inductive noise from large capacitymotors, etc. |
Individual specifications
|
TRIGGER
CPU SECTION |
|
| Interface | Ethernet (10BASE-T), GPIB |
| Setting parameters and transfering data | |
|
Trigger Control |
|
|
Trigger function
|
External trigger : Input contact signal |
| Cascade trigger : nput trigger output signal of other vehicle loaded unit.Input contact signal Synchronized when cascade-connecting multiple units. | |
| Level trigger : When absolute value of the input signal of the selected arbitrary 3 channels exceeds the setvalue, trigger ON. | |
| Number of pre-trigger data : 512 data × n (n=1, 2, 3, ~, 16) | |
| Trigger output : Outputs open collector signal (Synchronized when cascade-connecting multiple units.) | |
| (Synchronized when cascade-connecting multiple units.) | |
|
Number of pre-trigger data |
512 data × n (n=1, 2, 3, ~, 16) |
| Trigger output | Outputs open collector signal |
| (Synchronized when cascade-connecting multiple units.) | |
| Sampling frequency | 9 steps selectable : 0.1k/0.2k/0.5k/1k/2k/5k/ |
| LED monitor | |
| POWER | Lights up with power ON |
| READY | Lights up when waiting for trigger input |
| TRIGGER | Lights up when data exceeded thepreset trigger level. |
| RECORD | Lights up during recording data. |
| COMPLETE | Lights up when measurement ended. |
|
SIGNAL
CONDITIONER SECTION |
|
|
Number of measuring channels |
8 |
|
Signal Conditioner |
|
| Input |
Strain gage (4-gage method), Strain gage transducer (Sensor power supply = Supplying 2 , 5 or 10 VDC) |
|
Semiconductor gage (Sensor power supply = Supplying 2,5or 10 VDC) (Half/full bridge selectable) |
|
|
Semiconductor gage piezoresistive (Sensor power supply = Supplying 2 VDC) |
|
| Voltage input | |
| Potentiometer (Sensor power supply = Supplying 2 , 5 or 10 VDC) | |
|
The measurement mode that can be used is different depending on the control software. |
|
|
Applicable resistance range |
Strain gage:120 to 3000Ω |
| (Sensor power supply=When 2 VDC) | |
| 350 to 3000Ω (Sensor power supply=When 5 or 10 VDC) |
Registration
Please register for our website support when downloading files or documents.