Cable Connection Materials
KYOWA Cable Connection Kits JB-200A/JB-210A
These kits are highly reliable joint materials facilitatingtransducer cable extension and easy for connectionwork. With Sumitomo-3M Scotchcast 82-JA1 as thebase, all necessary items for cable-to-cable connectionare included in each kit. Use one kit for each connection.The JB-200A is for conventional 4-conductor cables.The JB-210A is for 8-conductor cables and is used forbiaxial inclination transducers of the BKJ-A-D series, etc.
Ｔｙｐｅ
| JB-200A | For 4-conductor cable |
| JB-210A | For 8-conductor cable |
Specifications
| Applicable Outer Diameter of Cable Sheath | 6 to 16 mm |
| Curing Time | Approx. 1 hour at 23℃,3 to 5 hours at 0℃ |
| Dimensions | Max. 32mm diameter by max,184mm long |
KYOWA Lightning Arrester Kit JB-100C
This kit is designed to connect to a cable near the transducer or indicator. Its special internal circuit protects the equipment from damage caused by induced lightning or induced voltage.
Specifications
| Applicable Outer Diameter of Cable Sheath | 6 to 16 mm |
| Built-in Arresters | 5 molded units, |
| single arrester unit is also available(HJB-001B). | |
| Curing Time | Approx. 1 hour at 23℃, |
| 3 to 5 hours at 0℃ | |
| Dimensions | Max. 44 mm |
| diameter by max. 210 mm long |
Cable Connectors with Waterproof Cap B-10B/B-15B
These cable connectors come with a waterproof cap to protect the extension cable tip of the civil engineering transducer. These units not only eliminate the need for troublesome cable tip protection and dampproofing work but also improve moisture-proof reliability. The NDIS connector enables one-touch connection to the indicator for immediate measurement.
Specifications
| Model | Attached Cabtyre Cable |
|---|---|
| B-10B | 4-conductor (0.5 mm2) cable, 1 m long |
| B-15B | 4-conductor (0.5 mm2) rubber-filled cable, 1 m long |
Case only is also available as B-10A or B-15A.
Registration
Please register for our website support when downloading files or documents.