LCTS-B
Stainless Steel Load Cells
- Recommended category:
5 to 100 kN
LCTS-B
Developed for Weighing Hoppers
and Tanks, LCTS-B Series is a
Stainless Steel Compression Load
Cells with Built-In Steady Brace
Mechanism.
Features
- Stainless steel structure enables use under conditions where the load cell is exposed to moisture and corrosive gases.
- "Thin" and "Top and Bottom plates integrated" design facilitates installation to hopper brackets or tank's feet.
- Hermetically-sealed structure (protection rating IP67)
- Built-in steady brace mechanism makes LCTS-B suitable for weighing stirring tanks or tanks with feet, while simplifying peripheral facilities by eliminating check rod, etc.
- Since the load cell can be fixed with bolts, dropping or floating of the load cell can be prevented.
PDF download
- LCTS-B (324.23 kB)
Specifications
| Model | Rated Capacity |
Weight (Approx.) |
|---|---|---|
| LCTS-B-5KN | 5kN | 5ｋｇ |
| LCTS-B-10KN | 10kN | |
| LCTS-B-20KN | 20kN | |
| LCTS-B-30KN | 30kN | 6ｋｇ |
| LCTS-B-50KN | 50kN | 11ｋｇ |
| LCTS-B-100KN | 100kN | 13ｋｇ |
Performance
| Rated Capacity | See table below. |
| Nonlinearity | Within±0.05% RO |
| Hysteresis | Within±0.05% RO |
| Repeatability | 0.02% RO or less |
| Rated Output | 2 mV/V (4000μm/m) ±0.1% |
Environmental Characteristics
| Safe Temperature Range | -20 to 70℃ |
| Compensated Temperature Range | -10 to 60℃ |
| Temperature Effect on Zero Balance | Within±0.003% RO/℃ |
| Temperature Effect on Output | Within±0.003%/℃ |
Electrical Characteristics
| Safe Excitation Voltage | 20V AC or DC |
| Recommended Excitation Voltage | 1 to 10V AC or DC |
| Input Resistance | 700Ω±0.7％ |
| Output Resistance | 700Ω±0.7％ |
| Cable |
4-conductor (0.3 mm
2
) chloroprene shielded cable, 7.6 mm diameter by 5 m long (10 m long with 50 and 100KN), |
| bared at the tip (Shield wire is not connecte to mainframe) |
Mechanical Properties
| Safe Overload Rating | 150％ |
| Critical Lateral Load | 10 kN (30 kN with 50 and 100KN) |
| (Maximum load which does not cause any mechanical damage) | |
| Weight | See table below. |
| Material | Stainless steel alloy |
| Protection Rating | IP67 (Watertight type conforming to JIS C 0920) |
Precautions
1. LCTS-B cannot be used for any onboard measurement.
2. LCTS-B cannot be used in an environment where it is frequently
exposed to lateral load.
3. LCTS-B cannot be installed to any inclined or vertical surface.
※Model name for instrinsic safety construction is "S6".
Installation Examples
Registration
Please register for our website support when downloading files or documents.
