| LMA-A (PDF 271kb) |
Small-Sized Compression Load Cells |
| 12 mmφ, 4 mm Thick (5 to 50 N) |
5N to 1 kN |
| LMB-A (PDF 252kb) |
Small-Sized Compression Load Cells |
| 10 mmφ, 4 mm Thick (50 to 200 N) |
50N to 2 kN |
| LMR-S-SA2 (PDF 260kb) |
Small-Sized Compression Load Cells |
| 21 mmφ, 10 mm Thick |
2 to 20 kN |
| LCX-A-ID (PDF 320kb) |
Small-Sized Compression Load Cells |
| 28 mmφ, 18 mm Thick (500 N to 2 kN) |
500 N to 20 kN |
| LCN-A (PDF 335kb) |
Small-Sized Compression Load Cells |
| Compact, Stainless Steel Make |
500 N to 20 kN |
| LCR-G-SA2 (PDF 198kb) |
Small-Sized Large-Capacity Compression Load Cells |
| 20 & 25 mmφ |
5 to 50 kN |
| LC-V (PDF 243kb) |
Small-Sized Compression Load Cells |
| Accuracy: 1/2000 |
50 to 200 kN |
| CR (Special Accessories) (PDF 208kb) |
Steady Braces |
| |
| LCV-A (PDF 306kb) |
Small-Sized Compression Load Cells |
| Compact but Large Capacity |
500 kN & 1 MN |
| LC-E (PDF 298kb) |
General-Purpose Compression Load Cells |
| Large Capacity |
2 & 5 MN |
| LC-FH/FL, LT-FH/FL (PDF 277kb) |
LC: High/low Temp. Compression Load Cells
LT: High/Low Temp. Tension Load Cells |
FH: -10 to 150 °C
FL: -196 to 30 °C |
500 N to 200 kN |
| LCK-A (PDF 264kb) |
Thin Compression Load Cells |
| 25 mm Thick (5 to 20 kN) |
5 to 200 kN |
| LCH-F (PDF 248kb) |
High-Accuracy Compression Load Cells |
| Accuracy: 1/5000 |
100 & 200 kN |
| LC-J (PDF 311kb) |
Corrosion-Resistant Compression Load Cells |
| Stainless Steel |
5 to 200 kN |
| LCTS-B (PDF 382kb) |
Stainless Steel Load Cells |
| Stainless Steel |
5 to 100 kN |
| LCTA-A (PDF 428kb) |
Thin Load Cells "Multiforce Sensors" |
| Thin |
500 N to 3 kN |
| LCTB-A (PDF 367kb) |
Thin Load Cells "Multiforce Sensors" |
| Thin |
5 to 50 kN |
| LCTE-A (PDF 387kb) |
Thin Load Cells "Multiforce Sensors" |
| Thin |
10 to 100 kN |
| LCTD-A (PDF 564kb) |
Thin Load Cells "Multiforce Sensors" |
| Thin |
100 to 300 kN |
| LCW-C-SA3 (PDF 371kb) |
Washer-Type Load Cells |
| For Press Forming |
10 to 300 kN |
| LCW-D-S/E-S (PDF 305kb) |
Washer-Type Load Cells |
| For Rolling/Depressing Pressure Measurement under Harsh Envrionment |
1 to 5 MN |
| LTZ-A (PDF 650kb) |
High-Accuracy Tension Load Cells |
| Small-Sized, High-Accuracy |
500 N to 50 kN |
| LU-E (PDF 386kb) |
Tension/Compression Load Cells |
| For Both Tension & Compression Loads |
500 N to 200 kN |
| LUR-A-SA1 (PDF 272kb) |
Compact Tension/Compression Load Cells |
| 28 mmφ, Weight 80 g |
50 N to 2 kN |
| LUX-A (PDF 915kb) |
Compact Tension/Compression Load Cells |
| Compact |
500 N to 20 kN |
| LU-A (PDF 224kb) |
Small-Capacity Tension/Compression Load Cells |
| Staight Beam System |
50 to 200 N |
| LUH-F (PDF 643kb) |
High-Accuracy Tension/Compression Load Cells |
| Accuracy: 1/5000 |
500 N to 200 kN |
| LUK-A (PDF 374kb) |
Tension/Compression Load Cells |
| Thin |
5 kN to 2 MN |
| LVS-A/LTS-A (PDF 319kb) |
Ultrasmall-Capacity Load Cells |
| Compact & Lightweight |
50 mN to 20 N |
| LUB-B (PDF 371kb) |
Beam-Type Load Cells |
| Accuracy: 1/3333 (50 to 500 N) |
50 N to 20 kN |
| LUB-C (PDF 282kb) |
Beam-Type Load Cells |
| Accuracy: 1/2000 |
1 to 50 kN |
| LFM-A (PDF 353kb) |
Compact 6-Component Force Transducers |
| Compact & Lightweight |
1 kN & 3 kN |
| LFX-A (PDF 334kb) |
Compact 6-Component Force Transducers with Built-in Amplifier |
| With Built-in Amplifier |
|
| LSM-B-SA1 (PDF 269kb) |
3-Component Force Transducers |
| For Special Purposes, Especially Suitable or Model Experiment |
10 to 500 N |
| LAT-1000A Series (PDF 925kb) |
6-Component Force Measuring Systems |
| Interference Compensation through Calculation for Accurate Messurement |
100 to 300 N |
| LUR-B-SA1 (PDF 300kb) |
Jack Load Cells |
| For Measuurement of Loads Applied to Jacks |
10 kN to 5 MN |
| LTA-B-S/C-S (PDF 333kb) |
Crane Load Cells |
| For Cranes |
20 to 500 kN |
| LTR-S-SA1 (PDF 217kb) |
One-End Revolving Tension Load Cells |
| For Measurement of Drawbar Pull and Rope Tension |
20 to 50 kN |
| LTP-S-S (PDF 240kb) |
Pin-Type Load Cells |
| Designed for Installtion to Axis of Crane's Pulley |
10 to 500 kN |
| LCD-A-S1 to S9 (PDF 284kb) |
Rectangular Load Cells |
| For Measurement of Loads to Pillow Block |
30 to 100 kN |
| LCD-B-S (PDF 204kb) |
Rectangular Load Cells |
| For Steelmaking Line |
5 to 20 kN |
| LCD-C-S (PDF 240kb) |
Rectangular Load Cells |
| For Steelmaking Line |
30 to 100 kN |
| LCR-B-S7 (PDF 329kb) |
Tension Meter Load Cells |
| Excellent Environmental Resistance |
5 to 200 kN |
